Custom Surron Ultra Bee Bracket for 203mm, 220mm, or 240mm rotor including modified front UB bracket

This is specifically for someone with their own Ultra Bee lever and caliper and wants to mount it to a Rawrr Mantis X / Pro with either 203mm, 220mm, or 240mm rotors.  No caliper or lever/master cylinder included.  This is for the custom 805eMoto bracket and a modified front Ultra Bee bracket.  This assumes a specific rotor size selected.  Once order is placed, I will procure a front UB stock bracket, modify that and include that with a custom 805eMoto bracket along with mounting bolts and washers.

Watch install video.  Note the kit now comes with a larger spacer and 1 washer rather then 5 washers.  Make sure you mount the washers/spacers through axle before the bracket.  The bracket mounts against the frame/swing arm.  The larger oval opening is to account for the weld bead around the pin preventing the bracket from spinning.

NOTE1: You will need to use hardware from your existing front or rear Ultra Bee bracket which are the mounting slider pin (screwed into your bracket), the metal clip on the bracket where rotor goes between, and rubber seal that goes into the bracket hole where 2nd slider pin gets inserted. 

NOTE2: This takes about 7 days as your order requires manual customization of the UB stock bracket which is not a normally stocked item but a special order.